Field · AI4 / A polytope that bursts and burns / turn 06

Is it what I asked for?

The recorded exchange: the request, the tool activity, every image the tools returned to the model, and its reply. Expand tool activity to read the steps; open an image to see it full size.

The person, in Field, before this turn

Ran the polytope box. Its Kotlin ran again, which built the mesh the model had written, and the window drew the burn-through as frames; the slots stayed at r6-1d055e9b75e6.

You

I ran the box, so your new mesh is live now. Look at a whole cycle and tell me plainly whether it's what I asked for: ragged glowing frames at the burst, whole when home.

Tool activity · 3 steps

Starting AI conversation
ObserveStackAutoSlot finished (4732 ms)
Completed

over time — 9 moments across 4.8 s, numbered and read left to right, then down, each labelled with when it was captured; each is stack.auto.face_decay in your shader: the window, as it is drawing now, at the slot's current numbers — everything the window draws, not only this module

AI4 · gpt-6-astra / openai

Yes—the live cycle now matches what you asked for.

Frames 2–4: the far-flung faces lose most of their interiors, leaving thin orange frames with visibly uneven, torn inner edges—not little dots.
Frames 4–8: the openings fill back in as the faces return and cool.
Frame 9: the solid is closed and dark, with no visible burn-through holes.

Some peak rims are almost wire-thin, but they remain recognizable face outlines rather than disappearing. I checked the 4.8-second cycle without changing anything.